Business

Cold Chain Monitoring System: Sensors, Alerts and Records for Cold Rooms, Reefer Trucks and Fridges

November 11, 2026 · 7 min read · Tim Etzal Group

Abstract illustration of a signal wave rising from a cold storage box toward a monitoring screen

A cold chain monitoring system is a set of temperature sensors, data loggers, gateways and software that records the temperature of chilled and frozen goods continuously, raises an alarm when a reading leaves its limits, and keeps a record of what happened. For cold rooms, reefer trucks and pharmacy fridges, what decides whether it works is where the probes sit, who answers an alarm in the middle of the night, and whether the record would stand up in front of an inspector or a customer.

Updated: 11 November 2026

What a cold chain monitoring system is

The cold chain is the unbroken sequence of temperature-controlled storage and transport that a product passes through from producer to user. Cold chain monitoring is the continuous measurement and recording of temperature, and sometimes humidity, door openings and power, along that chain. A temperature excursion is any period during which a product is outside the temperature range on its label or specification. A cold chain break is an excursion serious enough that the product's safety or quality can no longer be assumed.

What temperature counts as cold chain depends on the product. Two official Singapore sources give useful reference points:

  • For health products, HSA's Guidance Notes on Good Distribution Practice define cold chain products as "Products requiring storage condition of not more than 8°C", with the product label setting the exact range.
  • For food, SFA's educational sheet Transport Frozen and Chilled Food says frozen food should be maintained at -18°C or below, with a core temperature not exceeding -12°C during transportation, and chilled food at 4°C or below, with a core temperature not exceeding 7°C during transportation.

The parts, from sensor to record

  • Sensors and probes measure air or product temperature. A probe in a small buffer, such as a sealed bottle of liquid, tends to follow product temperature more closely than an air sensor and raises fewer false alarms when a door opens.
  • Data loggers store readings at a fixed interval, so the record survives a network outage. A display that shows only the current reading is a thermometer, not a monitoring system.
  • Gateways collect readings from loggers and send them to the software over WiFi, cellular or a long-range low-power network. Buffering means readings sent late still arrive.
  • Software stores readings, applies limits, sends alarms, records who acknowledged them and produces reports.
  • Backup power keeps loggers and gateways running during the power failure you most need to see.

Singapore requirements, from the official pages

Food (SFA). SFA's licensing page states that "All coldstores for meat and seafood products must be licensed before they store food for wholesale distribution." Its page on the responsibilities of food establishment operators requires licensees to "store food at required temperatures". Before SFA approves reefer containers for temporary food storage, "Temperature monitoring records and calibration of the temperature monitoring devices must be properly documented", and measures must be taken to "prevent any break in cold chain".

Health products (HSA). HSA states on its GMP and GDP page that compliance with its Guidance Notes on Good Distribution Practice is mandatory for all local importers and wholesalers. The guide (GUIDE-MQA-013, December 2023) asks in its Annex 1 on cold chain products for:

  • temperature mapping of cold rooms to find the right probe locations, repeated after significant changes;
  • continuous monitoring and recording of cold room and refrigerator temperatures, with probes calibrated periodically;
  • an alarm system for temperature excursions, with action and alert limits, tested periodically;
  • backup power so that storage temperature, probes and recording devices keep working in a power failure;
  • mapping and monitoring of refrigerated vehicles where they are the primary means of temperature control;
  • written procedures for handling excursions during receiving, storage and delivery.

The main text adds that monitoring devices should sit where fluctuations are most likely, or at the hottest and coldest locations, with calibration traceable to a national or international standard.

Pharmacy and clinic fridges. The GDP guide is written for licensed importers, wholesalers and GDP-certified companies. We have not found an official page that sets monitoring rules for every retail pharmacy or clinic fridge, so check the conditions of your own licence. The storage range on each product's label still applies, and the GDP annex is a sensible benchmark.

Cold rooms, reefer trucks and pharmacy fridges compared

SettingTypical set-upConnectivityWatch out for
Walk-in cold roomSeveral probes placed from a mapping study, door sensor, wall gatewayBuilding network with cellular backupDoors left open during loading, defrost cycles
Reefer truckLogger in the cargo box, sometimes linked to the unit's controllerCellular, buffering through dead zonesPre-cooling skipped, gaps between depots
Reefer container used as storageLogger with remote alarmCellularSFA approval and calibration records
Pharmacy or clinic fridgeOne buffered probe per fridge, min and max on the displayWiFi or cellular gatewayShared power points, alarms nobody hears after closing
Cool box per deliveryLogger travelling with the consignmentRead on arrivalProof of temperature for each delivery

Alerts and escalation: who responds out of hours

A cold chain monitoring system is only as good as the response to its alarms. HSA's guide asks for action and alert limits; in practice, an alert limit warns that a reading is drifting, and an action limit means someone must act now. For each cold room, truck or fridge, write down:

  1. The alert and action limits, and the delay before an alarm fires, so a door opened for loading does not wake anyone.
  2. The first person to receive the alarm, by role, in and out of business hours.
  3. A backup if the first person does not acknowledge within an agreed time, and a third level after that.
  4. What acknowledging means: the person confirms in the system that they are handling it, which stops the escalation.
  5. The first actions: check the door, the power and the unit, and move stock to a backup unit if needed.
  6. A separate alarm for a logger or gateway that stops reporting, because silence is not the same as safe.
  7. A periodic alarm test, with the result recorded.

For example, a food distributor with four cold rooms and six trucks might send alarms to the warehouse supervisor on duty, escalate to the operations manager if no one acknowledges, then to the owner, while the night guard keeps a printed sheet on where to move stock. Our guide to scoping an IoT pilot uses the same alert-owner approach for other equipment.

The records an inspector or customer will ask for

  • A continuous temperature log for each unit, with minimum and maximum readings.
  • Calibration certificates for every probe, and the date the next one is due.
  • The mapping report for each cold room, and for vehicles where required.
  • An excursion log: what happened, for how long, which stock, what was decided and by whom.
  • Alarm test and backup power test records.
  • Temperature records per consignment where a logger travels with the goods.

Records should be hard to change after the fact: an edit should keep the original value, who changed it and when. Make sure you can export them in a format your quality team or customer can open without the vendor's software.

Connected sensors are also network devices, so put them on a separate network segment, change default passwords and plan firmware updates, as our IoT security checklist sets out.

Key takeaways

  • A cold chain monitoring system combines sensors, loggers, gateways and software that record continuously, alarm on excursions and keep proof.
  • HSA's GDP guide makes mapping, continuous monitoring, calibrated probes, tested alarms and backup power the baseline for licensed importers and wholesalers of health products.
  • SFA requires licensees to store food at required temperatures and expects documented monitoring and calibration records for reefer containers used as storage.
  • Alarms need named owners, escalation, acknowledgement and a separate alarm for devices that go silent.
  • Keep records that cannot be quietly edited: logs, calibration, mapping, excursions and alarm tests.

How Etzal Group helps

Etzal Group's IoT and Control line is delivered as a project plus monitoring: we design the setup, our field technicians install and test the sensors and edge devices on site, readings arrive in one place, and after go-live we keep watching the devices and their data on terms written into the same quote. Where temperature data needs to sit beside orders, deliveries or stock, our Enterprise Software line can bring it onto one screen. We do not certify premises or replace your quality team's judgement. To scope a first site, book a free consultation.

Frequently asked questions

What is cold chain monitoring?

The continuous measurement and recording of temperature, and sometimes humidity, door openings and power, for goods that must stay chilled or frozen, with alarms when readings leave their limits.

What is a cold chain monitoring system?

The combination of sensors, data loggers, gateways and software that records temperatures continuously, raises and escalates alarms, and keeps the records that show a product stayed within its range.

What temperature is cold chain?

It depends on the product label. HSA's GDP guide defines cold chain health products as those requiring storage at not more than 8°C, and SFA's food transport guidance gives 4°C or below for chilled food and -18°C or below for frozen food.

What is cold chain tracking?

Following a shipment's temperature, and often its location, through each leg of transport, usually with a logger that travels with the goods or a device fitted to the vehicle.

What is cold chain management?

The wider discipline of planning, running and documenting temperature-controlled storage and transport: equipment, procedures, training, monitoring and the handling of excursions.

What does a cold chain break mean?

An excursion serious enough that the product's safety or quality can no longer be assumed. The affected stock is set aside and assessed against its label conditions and your procedures before it is used or discarded.

Author

Tim Etzal Group

Etzal Group Team, helping businesses grow with technology. Contact us.

Related service

Free consultation

Not sure where to start? We will map the right system for your business, free.