A 1.4 MWp Rooftop Solar Plant Opens at a Bekasi Factory: What Owners Should Monitor
November 13, 2026 · 5 min read · Etzal Group Team
On Wednesday, 4 November 2026, a rooftop solar installation of 1.4 MWp covering 9,669 square metres was inaugurated at the Bekasi-2 Plant of Coca-Cola Europacific Partners (CCEP) Indonesia. RMOL reported it on 6 November 2026 and said the installation was developed with PT Cikarang Listrindo Tbk as the solar energy solution provider.
One inauguration is not a measured trend, and we do not read it as one. For owners of mid-sized plants who are weighing rooftop solar, called PLTS atap in Indonesian, or already have it, the event is a good moment to ask a different question: what data has to be visible for the investment to be accountable?
What was reported
In the RMOL report, Eniya Listiani Dewi, Director General of New and Renewable Energy and Energy Conservation at the Ministry of Energy and Mineral Resources, said that reaching energy transition targets requires collaboration among all stakeholders (our translation).
The day before the inauguration, the state utility PLN spoke about tariffs. Gregorius Adi Trianto, PLN's EVP for Corporate Communication and CSR, said on Tuesday, 3 November 2026, as quoted by Kontan, that for October to December 2026 the electricity tariff stays the same and is unchanged from the previous period (our translation).
That tariff information has two limits. The Kontan article we read does not include the industrial tariff per kWh, so we do not quote a figure. The tariff for the first quarter of 2027 has not been announced either. Check PLN's latest official notice for your own customer class.
On costs more broadly, the October 2026 manufacturing PMI survey reported by Katadata recorded rising input cost inflation, mainly from raw material and fuel prices. The same report says the government names better certainty of energy and raw material supply among its measures.
Why monitoring matters more than the panels
The sources we read give no savings figure and no payback period for the Bekasi installation, and we will not invent one. That is in fact the point. The savings from a rooftop system can only be known from the plant's own data, and many owners do not have it.
What is usually available is one number from the inverter app: total kWh generated today. It answers "how much was produced". It does not answer the three questions a finance director asks:
- How much of that production did the factory really use?
- How much purchased grid electricity did it displace?
- What is that worth in rupiah this month?
Four groups of data that must be visible
This is our advice as designers of monitoring systems, and it is the core of factory rooftop solar monitoring.
| Data | Source | Question answered |
|---|---|---|
| Hourly generation | Inverter or solar output meter | Is the system producing what it should for that day's weather? |
| Self-consumption | Difference between the solar meter and the meter at the grid connection | How much production was absorbed by plant load? |
| Grid electricity displaced | Hourly main grid meter, before and after | How far did purchases fall in daylight hours? |
| Rupiah value | kWh displaced times your tariff | What saving can finance book? |
Notes on each:
- Hourly, not daily. A daily total hides a panel shaded at certain hours, an inverter that stopped for an hour, or a slow decline from dust.
- Self-consumption depends on the load pattern. A plant that stops on Sundays still generates on Sundays. What happens to the surplus is decided by the rules and contract that apply to you, which we do not detail here.
- The hourly grid meter is the honest comparison. A monthly bill is too coarse, because it is mixed up with changes in factory output.
- Rupiah value uses your own tariff. Take it from your bill, and update it whenever tariffs are announced.
Supporting data that gets forgotten
- Operating hours and plant output. Without them, a fall in purchased electricity cannot be told apart from a fall in production.
- Inverter events and faults. Start time, recovery time and cause.
- Panel cleaning schedule. So its effect on generation shows up.
- Roof condition. Leaks and structural load are the building owner's concern, whatever the contract says.
When a third party builds and owns the system
Some plants do not buy the system. They pay a provider for the electricity it generates. In that arrangement monitoring matters more, because the provider's invoice is based on the provider's meter. Three things worth asking for:
- Direct read access to meter data, not only a monthly PDF report.
- A written definition of billable kWh, especially when the plant does not absorb all production.
- A method for resolving differences between the provider's meter and yours.
A check meter of your own adds cost, but it gives you a basis for verifying invoices over a long contract.
Technical options and their price
- The inverter's own app. Free and quick. It sees only the generation side, and its data is often hard to export.
- Extra meters at the main panel with a simple dashboard. Answers the four data groups above. Needs installation by an electrician and someone to look after the data.
- Integrated with per-line energy monitoring. Shows which lines could shift into daylight hours. The most useful and the most work, and only worth it if someone acts on the data.
Start with the second option. The third makes sense once three months of data show there is load that can be moved.
A checklist for plant owners
- Can you see hourly solar generation for the last three months?
- Do you have a self-consumption figure, not only total generation?
- Does finance receive a monthly savings figure with the method behind it?
- Who is alerted when generation drops sharply on a clear day?
- Is meter data stored somewhere you still own if the provider changes?
If most answers are no, our IoT and control systems team can help install the meters and dashboard that answer them.
Note: permitting, quota and contract terms for rooftop solar should be confirmed with PLN, the Ministry of Energy and Mineral Resources or your consultant.
Sources
- RMOL, 6 November 2026: Energi Terbarukan Makin Dibutuhkan untuk Operasional Industri
- Kontan, 3 November 2026: PLN Tegaskan Tarif Listrik hingga Akhir 2026 Tak Naik, Ini Penjelasannya
- Katadata, 2 November 2026: PMI Manufaktur Indonesia Melesat, Kalahkan Jepang, Vietnam hingga Cina
Frequently asked questions
How large is the rooftop solar plant inaugurated in Bekasi?
According to RMOL, it is 1.4 MWp across 9,669 square metres at the Bekasi-2 Plant of Coca-Cola Europacific Partners Indonesia, developed with PT Cikarang Listrindo Tbk.
Which rooftop solar data matters most?
Hourly generation, the share the factory consumes itself, the grid electricity displaced, and the rupiah value at the tariff that applies to your customer class.
Are electricity tariffs changing before the end of 2026?
State utility PLN said on 3 November 2026 that tariffs for October to December 2026 are unchanged. The first quarter 2027 tariff has not been announced, so check the latest official notice.
Related service
WhatsApp AI Chatbot
We build, train, and run a WhatsApp AI agent that answers customers 24/7, qualifies leads, and follows up.
